
Mobile Measuring Cases – Flexible Solutions
Power Quality Analyzer UBN PQ5000 Mobile
The UBN PQ5000-MOBIL measuring case can be used to check all operationally relevant network parameters of a power supply. The measurement covers the power quality analysis, the availability of the supply, the long-term change of network parameters, and the verification of improvement measures. The case can also be used for an energetic load curve analysis of active or reactive energy.
The UBN PQ5000 MOBIL combines high-precision measurement with innovative functionality and communication capabilities. Faults can thus be localized in the shortest possible time and documented in compliance with standards according to IEC 61000-4-30 ED. 3.0 Class A documentation.
External evaluation software can be dispensed with, since the device-internal PQ-EASY REPORT allows statistical evaluation directly from the measuring device. The ready-made report generators meet the standards according to EN 50160, IEC 61000-2-2, IEC 61000-2-4, and IEC 610002-12, as well as IEEE519, or monitor in-house limit value standards. The measurement case is connected using up to four flexible Rogowski coils and the voltage tap clamps included in the measurement set.


Mobile Measuring Cases for Power Quality Monitoring
Product highlights
- Lockable, waterproof transport case
- Integrated WLAN for pairing with PC, laptop, or tablet
- Intuitive, device-independent commissioning via Web browser
- Integrated power quality reporting function (PQEasy Report)
Monitoring capabilities and benefits
- Statistical evaluation (quality of supply)
- Incident recording (availability of supply)
- Evaluation of operational changes / improvement measures
- Recording of load profiles, short-term load peaks, and meter values
Certified network analysis
- Independent certification by the Swiss Federal Institute of Metrology Device type PQI-A FI2 according to IEC 62586-1
- Flicker meter class F1
- Marking concept: multiphase approach according to IEC 61000-4-30
Thanks to METAS certification according to IEC 62586-2 (standard for testing compliance with IEC 61000-4-30), the UBN PQ5000-MOBIL measuring case can serve as a reliable and comparable source of information for regulatory authorities, for negotiations with energy suppliers, or for internal quality control.
Technical data
Basic features
|
|
Network state
|
|
Energy flow analysis
|
|
Power quality
|
|
Communication
|
|
Connection Types |
|
Documents download
UBN PQ5000 Mobile interface description
UBN PQ5000 Mobile certificate on request
Variant
-
UBN PQ5000 Power Quality Analyzer Mobile Item number: 005060 Basic version Measuring case
Power Quality Analyzer Class A IEC 61000-4-30 Ed. 3 with
Conformity assessment according to EN50160, IEC61000-2-2/-4/-12
4x Rogowski coils for measuring range up to 2,000 A,
measuring category: 1000V CAT III, 600V CAT IV
5x Delphin terminals (L1-3, N, PE) for measuring range (LN/LL): 520V LN / 900V LL,
measuring category: 600V CAT III
Time synchronization: via GPS (receiver included)
Interfaces: WLAN and Ethernet RJ45 100BaseTX
Mobile Measuring Cases
Mobile measuring cases offer you the possibility to take your current measurements anywhere and at any time. Different configurations in terms of connection type, data storage, and transmission allow extensive applications in mobile practice and offer the optimal solution for every application. The configuration options also allow you to meet the requirements of third-party metering and third-party accrual.
The all-rubber housing, manufactured using the press and vulcanization process, ensure many possible applications for the expansion and extension of your existing measurement network. The durable housing also ensures high load capacity and is resistant to chemical, aging, and weather-related influences over the long term.
Case features
- Housing made of high-quality solid rubber (butyl rubber) is splash-proof (protection class max. IP 65), dust-proof, and insulated for protection
- High mechanical strength, unbreakable
- Shore hardness according to DIN 53505
- Resistant to aging and corrosion
- Resistant to acids, alkalis, grease, and oils
- Resistant to cold and weather
- Self-extinguishing and flame-retardant according to VDE 0471/DIN EN 60695
- Externally accessible fuse elements splash-proof due to transparent, impact-resistant, and self-closing special cover
- Compliance with all technical and electrotechnical safety regulations (VDE)
Technical features
- With billing meter (MID) or special meter with calibrated meter reading for third-party quantity accrual.
Variant 1: CEE built-in socket 5 pol. 16 A; 32 A, 63 A/400 V
Variant 2: CEE built-in socket 5 pol. + Schuko. 16 A; 32 A, 63 A/400 V - Optionally with data management and remote data transmission (GSM or Ethernet)
- Sends flexible data reports as well as user-specific reports and status messages
- Optional service fee for connection of the measuring case to Efficio energy management software:
Initialization of the SIM card
Setup of a measuring point in the M-Bus master
Setup of CSV export via FTP
Integration of the measuring point in Efficio
Communication test including function test
Variants
-
CASE 16A 230V/1 BME461 TCP/IP Item number: 004702 Measuring case solid rubber safety distributor
Input: 1 piece all-rubber safety plug, 3 pole, 16 A, 230 V,
3m special cable Industrieflex, 07HT 3G 1,5 mm²
Output: 1 piece protective contact socket 3 pol. / 16 A / 230 V
three-phase meter 80 A / 230/400 V / digital
– multifunctional display
– Approval MID
– Accuracy class B
– Connection: RJ45, Modbus TCP
-
Case 16A 230V/3 BME461 TCP/IP Item number: 004839 Measuring case solid rubber safety distributor
Input: 1 piece all-rubber safety plug, 3 pole, 16 A, 230 V,
3m special cable Industrieflex, 07HT 3G 1,5 mm²
Output: 1 piece protective contact socket 3 pol. / 16 A / 230 V
three-phase meter 80 A / 230/400 V / digital
– multifunctional display
– Approval MID
– Accuracy class B
– Connection: RJ45, Modbus TCP
-
CASE 16A 400V BME461 TCP/IP Item number: 004704 Measuring case solid rubber safety distributor
Input: 1 piece solid rubber safety plug, 3 pole, 16 A, 400 V, 6 h,
3m special cable Industrieflex, 07HT 3G 1.5 mm²
Output: 1 piece protective contact socket 3 pol. / 16 A / 400 V
three-phase meter 80 A / 230/400 V / digital
– multifunctional display
– Approval MID
– Accuracy class B
– Connection: RJ45, Modbus TCP
-
CASE 32A 400V BME461 TCP/IP Item number: 004703 Measuring case solid rubber safety distributor
Input: 1 piece all-rubber safety plug, 5-pin, 32 A, 400 V, 6 h,
3m special cable Industrieflex, 07HT 3G 1.5 mm²
Output: 1 piece protective contact socket 5 pin / 32 A / 400 V
three-phase meter 80 A / 230/400 V / digital
– multifunctional display
– Approval MID
– Accuracy class B
– Connection: RJ45, Modbus TCP
-
CASE 16A BME461 LTE Item number: 004661 Measuring case solid rubber safety distributor
Input: 1 piece solid rubber safety plug, 5 pole, 16 A, 400 V, 6 h,
3m special cable Industrieflex, 07HT 3G 1,5 mm²
Output: 1 piece protective contact socket 5 pin / 16 A / 400 V
Three-phase meter 80 A / 400 V / Digital
– Multifunctional display
– Approval MID
– Accuracy class B
– BUS connection M-Bus
– Connection: mobile radio, CSV file
-
CASE 32A BME461 LTE Item number: 004662 Measuring case solid rubber safety distributor
Input: 1 piece all-rubber safety plug, 5-pin, 32 A, 400 V, 6 h,
3m special cable Industrieflex, 07HT 3G 1.5 mm²
Output: 1 piece protective contact socket 5 pin / 32 A / 400 V
three-phase meter 80 A / 400 V / digital
– Multifunctional display
– Approval MID
– Accuracy class B
– BUS connection M-Bus
– Connection: mobile radio, CSV file
-
CASE 63A BME461 LTE Item number: 004663 Measuring case solid rubber safety distributor
Input: 1 piece solid rubber safety plug, 5 pole, 63 A, 400 V, 6 h,
3m special cable Industrieflex, 07HT 3G 1.5 mm²
Output: 1 piece protective contact socket 5 pin / 63 A / 400 V
three-phase meter 80 A / 400 V / digital
– Multifunctional display
– Approval MID
– Accuracy class B
– BUS connection M-Bus
– Connection: mobile radio, CSV file
