en

Transparent monitoring of network quality enables early detection of problems

UBN 40/Rogowski Kit

The UBN 40 is a modern device for measuring, storing and analyzing energy consumption. Due to the different variants such as direct or transducer measurement and the possibility of combining with flexible Rogowski coils, the UBN 40 offers a variety of measurement options. The UBN 40 kit automatically includes the suitable Rogowski sinks.

All parameters can be set and programmed directly on the network analyzer using three buttons. With a width of 4TE, the device can be installed in the control cabinet to save space. Thanks to various data interfaces (Modbus RTU/TCP) and an integrated web server, it can be optimally integrated into existing systems or read remotely via a web interface. The device is suitable for the following areas of application: energy audits, energy and load management, network and machine monitoring.

    Characteristics
    • 4TE width, DIN rail mounting
    • 8MB memory for MIN/MAX/average values
    • Bidirectional four-quadrant measurement
    • Measurement in 1, 3 or 4-wire networks
    • Optionally: ModbusRTU or TCP
    • Integrated HTTP web server (TCP variant)
    Technical data
    Power supply
    Voltage 85 … 265 VAC (extern)
    Frequency 50/60 Hz
    Power consumption 1,5 VA max.
    Voltage inputs 3x 10/17 … 3×285/495 VAC
    Load max. 3 VA pro Phase
    Current inputs
    measuring current 1/5 A transformer measurement
    80A direct measurement
    flexible Rogowski measurement (MFC150)
    Measurement accuracy
    Voltage +- 0.2% display, +- 10% fs
    Power +- 0.4% display, +- 0.1% fs
    Performance +- 0,5% display, +- 0,1% fs
    Frequency +- 0.1% display +- 1 digit at 45 … 65 Hz
    Accuracy classes Active energy: Class 1 according to IEC/EN 62053-21
    Reactive energy: Class 2 according to IEC/EN 62053-23
    Communication interface
    Typ RS485 (Modbus RTU, ASCII) + ModbusTCP
    baud rate 300…57600 Baud
    operating temperatur -25°C…. +55°C
    Storage temperature -25°C…. +75°C
    Humidity max. 80% non-condensing
    Device
    Material Plastic housing
    Protection unit IP20 (terminals) + IP51 (only when installed in a housing)
    Clamps 1.5mm² … 6mm² (for transducer measurement)
    1.5mm² … 35mm² (for direct measurement)
    Dimensions 72x90x65 mm
    Variants and tender texts
    UBN40 RGW KIT70 LAN 3M Item number: 003304
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT90 LAN 3M Item number: 004124
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT30 LAN 3M Item number: 003315
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT45 LAN 3M Item number: 003317
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT90 RS 3M Item number: 004125
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 1x digital
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT70 RS 3M Item number: 003318
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 1x digital
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT45 RS 3M Item number: 003316
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 1x digital
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 RGW KIT30 RS 3M Item number: 003303
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 1x digital
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 80A RS Item number: 003301
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 1x digital
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 6A RS Item number: 003306
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 1x digital
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 80A LAN Item number: 003302
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    RAM: 8 MB
    Offerlist Tender Text

    UBN40 6A LAN Item number: 003307
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    RAM: 8 MB
    Offerlist Tender Text

UBN 309/Rogowski Kit

The UBN 309 is a modern and innovative device for measuring, storing and analyzing energy consumption. By using classic current transformers or connecting via flexible Rogowski coils, the UBN 309 offers a variety of measuring options. The UBN 309 kit automatically includes the appropriate Rogowski coils.

Thanks to various data interfaces (Modbus RTU/TCP) and an integrated web server, it can be optimally integrated into existing systems or read remotely via a web interface. The device is suitable for the following areas of application: energy audits, energy and load management, network and machine monitoring.

    Characteristics
    • DIN 96×96 front door installation
    • very low installation depth of only 3.9cm
    • Memory for MIN/MAX/AVG
    • 1//5A converter measurement
    • flexible measurement via Rogowski coils (option)
    • Bi-directional four-quadrant measurement
    • Measurement up to the 15th harmonic (ENH version)
    • Measurement in 1, 3 or 4-wire network
    • 2 digital outputs, 1 digital input
    • Optionally: Modbus RTU or Modbus TCP
    • Integrated HTTP web server (TCP variant)
    Technical data
    Voltage 230V AC +- 15% (RS485) 2,7 VA
    (115V AC on request)
    85 … 265V AC (Ethernet) 5,8 VA
    max. Consumption (per phase) max. 0,15VA
    Frequency 50/60Hz
    Voltage range 600VAC max L-L
    Current range A) 1(5)A transformer measurement
    B) flexible Rogowski measurement (scaling: 500/4000/20000A)
    Voltage +- 0,2% reading, 10% fs.. fs
    Power +- 0,4% reading, 5% fs.. fs
    Performance +- 0,5% reading + 0,1% fs (PF=1)
    Frequency +-0,1% reading +-1 Stelle bei 45… 65 Hz
    Accuracy classes
    Active energy Class 1 according to IEC/EN 62053-21
    Reactive energy Class 2 according to IEC/EN 62053-23
    Display backlit LCD display, 78 x 61mm
    Protocols ModbusTCP (HTTP Webserver), ModbusRTU/ASCII
    baud rate 300 … 57600bps, 10/100 Mbps (TCP)
    Pulse output 27V DC, 27mA
    Measuring terminals Current/voltage 2.5 mm²
    Inputs/outputs, RS port 1.5 mm²
    Dimensions (WxHxD) 96x96x40 mm
    Weight 450 g
    operating temperatur -25°C … +55°C
    Storage temperature -25°C … +75°C
    Humidity max. 80%
    Degree of protection IP54 (only when installed in a housing) IP20 (terminals)
    Variants and tender texts
    UBN309 RGW90 E LAN 3M Item number: 004123
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    Outputs: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 6A E RS Item number: 003354
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 6A B RS Item number: 003355
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Four-quadrant measurement energy
    Limit monitoring
    Output: 2x digital
    RAM: 1 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 6A E RS AO Item number: 004072
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Output: 2x digital, 1x analog
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 RGW30 E RS 3M Item number: 003364
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Outputs: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 RGW30 E RS AO 3M Item number: 004197
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    Outputs: 2x digital, 1x analog
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 6A E LAN Item number: 003356
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    Output: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 RGW30 E LAN 3M Item number: 003365
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    Outputs: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 RGW45 E LAN 3M Item number: 003367
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    Outputs: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

    UBN309 RGW70 E LAN 3M Item number: 003368
    Network monitoring module
    Multi-measuring function (U, I, P, Q, S, PF, f, THD U, THD I, In)
    Harmonics (U, I) 15th harmonics
    Four-quadrant measurement energy
    Limit monitoring
    integrated web server
    Outputs: 2x digital
    RAM: 8 MB
    Design: front door 96x96mm
    Offerlist Tender Text

Advanced monitoring with network analyzers 

UBN AM network analyzers are compact devices for measuring and monitoring power networks. They are characterized by precision and intuitive operation. The UBN AM meets all the requirements of advanced network monitoring and can be individually adapted to almost any measurement task thanks to optional expansion components. The process environment can be connected with optional communication interfaces, via digital I/Os, analog outputs or relays.

The devices are used in industrial systems, building automation or in energy distribution. In low-voltage networks, nominal voltages up to 690V CATIII can be connected directly; phase currents are recorded via current transformers. The universal measuring system allows the UBN-AM to be used in all common network types.
The device can be operated and parameterized locally via the TFT display of the UBN network analyzer or on mobile or stationary devices thanks to the integrated web server. A comprehensive security concept protects UBN from data manipulation or unauthorized network access. The data transmission is HTTPS encrypted, the measurement visualization in Efficio (release 5.0 or later) can be done via website widgets.

UBN AM1000

UBN AM1000 network analyzers are designed for panel mounting with the standard cutout 96x96mm. They each have three measuring inputs for connecting current and voltage transformers, an Ethernet interface (Modbus TCP, HTTPS, NTP), two digital outputs and an expansion option. The measurement accuracy for currents/voltages is 0.2%, for power 0.5% and for energy values 1%.

    Technical data
    Basic properties

     

    • For panel installation 96×96 mm
    • 3 current and 3 voltage measurement channels with 0.2% accuracy, direct measurement or via current and voltage converters
    • Measuring category 600V, CAT III (voltage), 300V, CAT III (current)
    • Standard I/Os: 1 digital output, 1 digital input
    • Extensions: 1 hardware option
    • Internal data logger 4 GB (option: UBN AM1000 EW.LOG)
    • Monitoring and alarming via limit values and monitoring functions
    Network status

     

    • Provision of all voltages, currents, powers, power factors every 10/12 periods
    • Advanced reactive power analysis
    • Variance of network sizes with time reference
    Energy flow analysis

     

    • Load profile storage with fluctuation range (min/max) per interval
    • Active/reactive energy class 1 (HT/NT, purchase/supply), programmable resolution
    • Further average values and counters with selectable base size
    Network quality

     

    • Harmonic analysis according to IEC61000-4-7
    • Evaluation of the asymmetry of voltages and currents
    • Vector and rotation indicator for connecting control
    • Curve shape representation
    Hardware option

     

    • Analog outputs ±20mA (2/4)
    • Relay outputs (2)
    • Digital inputs (4) active / passive
    • GPS time synchronization
    • Fault current detection (differential or earth conductor current)
    • Temperature monitoring (PT100, PTC)
    • IEC61850
    • Profinet I/O
    Communication

     

    • Ethernet (Modbus/TCP, http/https, NTP, SFTP, SYSLOG), IEC61850, Profinet I/O, Modbus/RTU
    • Automated data export to SFTP server (push operation)
    Security features
    • Flexible role-based access control
    • Encrypted communication via https
    • Audit log registers all security-relevant processes, support of SYSLOG for transfer to central monitoring server
    • Client whitelist: IP address list to restrict the computers authorized to access
    • Digital firmware signature: Manipulated firmware files cannot be imported into the device
    Variants and tender texts
    UBN AM1000 network analyzer Item number: 004967
    Transparent monitoring of power quality and energy consumptionstrong,
    wpml_linebreakstrong, lbThe UBN AM1000 is a compact device for measuring and monitoring in high-current networks. It impresses with the quality of the display and the intuitive operation. The device provides a wide range of functionality, which can be expanded even further with optional components. The modern, multilingual design allows the device to be operated intuitively via the device website (Ethernet option required) or the high-resolution color TFT display (320x240px). or to parameterize. The web server enables remote query, display and analysis of the measurement data. No additional software is required.
    Basic version
    , lb96x96 mm panel mounting device
    Interface: 1x RJ45 Ethernet 100baseTx (web server)
    Standard I/O: 1x passive digital input, 1x passive digital output
    Auxiliary voltage: 230 VAC, 50/60 Hz
    Offerlist Tender Text

    Interfaces and accessories
    UBN PQ_AM Auxiliary voltage 24V DC Item number: 004970
    UBN PQ_AM Auxiliary voltage 24V DCReplacement for the 230VAC standard supply of a power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000 with 24V DC
    Offerlist Tender Text

    UBN PQ_AM RS485 Item number: 004961
    RS485
    Interface card with Modbus RTU protocol integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM UPS battery Item number: 004952
    UPS battery uninterruptible power supply 1,150 mAh battery power reserve 5 x 3 min integrated in power quality analyzer PQ3000/PQ5000 or multifunctional device AM3000
    Offerlist Tender Text

    UBN AM1000 4GB data storage Item number: 004969
    4 GB data memory for archiving periodic measurement data and events in the AM1000 multifunctional device
    Offerlist Tender Text

    UBN PQ_AM Profinet Item number: 004959
    Profinet
    Interface card (TCP/IP)Industrial Ethernet PNO compliant automationintegrated in power quality analyzer PQ1000/3000/5000or multifunction device AM1000/AM2000/AM3000a
    Offerlist Tender Text

    UBN PQ_AM IEC61850 Item number: 004958
    IEC 61850
    Interface card (TCP/IP) transmission protocol for substation automation integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM residual current detection Item number: 004956
    Residual current detection two-channel module integrated into power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card passive Item number: 004955
    Digital input card passive quadruple, passive for signal acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM analog output card Item number: 004954
    Analog output card dual, bipolar +-20 mA for signal output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM switching output card Item number: 004953
    Switch output cardRelay dual for alarm output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card active Item number: 004960
    Digital input card active four-fold, active for signal/pulse acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    Download documents

UBN AM3000

UBN AM3000 power analyzers are designed for panel mounting with a 144x144mm standard cutout. They each have four measuring inputs for connecting current and voltage transformers as well as measuring inputs for residual current detection or residual current measurement. The basic model is equipped with an Ethernet interface (Modbus TCP, HTTPS, NTP), a digital input and two digital outputs, which can be supplemented with up to 4 expansion options. The measurement accuracy of the UBN AM3000 is 0.2% for currents/voltages, 0.5% for power and 0.5% for and for energy values.

    Technical data
    Basic properties

     

    • For panel installation 144×144 mm
    • 4 current and voltage measurement channels with 0.1% accuracy, direct measurement up to 690V LL or via current and voltage converters
    • Measuring category 600V, CAT III (voltage), 300V, CAT III (current)
    • Standard-I/Os: 2 Digitalausgänge, 1 Digitaleingang
    • Data logger 16 GB MicroSD card (option: UBN AM3000 EW.LOG)
    • Monitoring and alarming via limit values and monitoring functions
    Network status

     

    • Provision of all voltages, currents, powers, power factors every 10/12 periods
    • Advanced reactive power analysis
    • Variance of network sizes with time reference
    Energy flow analysis

     

    • Load profile storage with fluctuation range (min/max) per interval
    • Active/reactive energy class 1 (HT/NT, purchase/supply), programmable resolution
    • Further average values and counters with selectable base size
    Network quality

     

    • Harmonic analysis according to IEC61000-4-7
    • Evaluation of the asymmetry of voltages and currents
    • Vector and rotation indicator for connecting control
    • Curve shape representation
    • Optional fault recorder for PQ events (voltage dip, voltage rise, voltage interruption) according to IEC 61000-4-30 Ed.3 with RMS1/2 and waveform storage
    Hardware option

     

    Up to 4 expansion modules can be selected:

    • Analog outputs ±20mA (2/4)
    • Relay outputs (2)
    • Digital inputs (4) active / passive
    • GPS time synchronization
    • USV (5×3 min)
    • Fault current detection (differential or earth conductor current)
    • Temperature monitoring (PT100, PTC)
    • IEC61850
    • Profinet I/O
    Communication

     

    • Ethernet (Modbus/TCP, http/https, NTP, SFTP, SYSLOG)
    • IEC61850
    • Profinet I/O
    • RS485 (Modbus/RTU)
    • Automated data export to SFTP server (push operation)
    Security features
    • Flexible role-based access control
    • Encrypted communication via https
    • Audit log registers all security-relevant processes, support of SYSLOG for transfer to central monitoring server
    • Client whitelist: IP address list to restrict the computers authorized to access
    • Digital firmware signature: Manipulated firmware files cannot be imported into the device
    Variants and tender texts
    UBN AM3000 network analyzer Item number: 004965
    Basic version 144×144 mm panel mounting device
    Interface: 1x RJ45 Ethernet 100baseTx, 2 portsProtocols: Modbus TCP, http, NTPStandard I/O: 1x passive digital input, 2x passive digital output
    Offerlist Tender Text

    Interfaces and accessories
    UBN PQ_AM Auxiliary voltage 24V DC Item number: 004970
    UBN PQ_AM Auxiliary voltage 24V DCReplacement for the 230VAC standard supply of a power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000 with 24V DC
    Offerlist Tender Text

    UBN PQ_AM RS485 Item number: 004961
    RS485
    Interface card with Modbus RTU protocol integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM UPS battery Item number: 004952
    UPS battery uninterruptible power supply 1,150 mAh battery power reserve 5 x 3 min integrated in power quality analyzer PQ3000/PQ5000 or multifunctional device AM3000
    Offerlist Tender Text

    UBN PQ_AM Profinet Item number: 004959
    Profinet
    Interface card (TCP/IP)Industrial Ethernet PNO compliant automationintegrated in power quality analyzer PQ1000/3000/5000or multifunction device AM1000/AM2000/AM3000a
    Offerlist Tender Text

    UBN PQ_AM IEC61850 Item number: 004958
    IEC 61850
    Interface card (TCP/IP) transmission protocol for substation automation integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM residual current detection Item number: 004956
    Residual current detection two-channel module integrated into power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card passive Item number: 004955
    Digital input card passive quadruple, passive for signal acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM analog output card Item number: 004954
    Analog output card dual, bipolar +-20 mA for signal output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM switching output card Item number: 004953
    Switch output cardRelay dual for alarm output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card active Item number: 004960
    Digital input card active four-fold, active for signal/pulse acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    Download documents
Power Quality with power quality analyzers 

The devices in the UBN PQ series are compact devices for the qualitative measurement and monitoring of power networks. They can be connected directly to nominal voltages up to 690V CATIII and phase currents can be connected via harmonic-capable current transformers, e.g. B. Mountain XCTB. The universal measuring system allows the use of the UBN PQ1000, PQ3000 and PQ5000 devices in all common network types.

The PQ series products are metrologically certified Class A or S devices according to IEC 61000-4-30 Ed. 3. They provide reliable information for negotiations with energy suppliers or internal network quality control. With the help of continuous monitoring, incidents can be analyzed and archived in the long-term memory of the device. The report generator integrated in the web server intuitively enables the creation of a power quality report according to EN50160, EN61000-2-2/4/12 or internal company limit values without external additional software.
The PQ devices are connected to the process environment via communication interfaces, digital I/Os, analog outputs or relays. A comprehensive security concept protects the UBN PQ devices from data manipulation or unauthorized network access. Data transmission is HTTPS encrypted, and measurement visualization in the Efficio energy management software (release 5.0 or later) is possible via website widgets.

UBN PQ1000

UBN PQ1000 power quality analyzers enable a permanent assessment of power quality according to IEC 61000-4-30 Ed.3 in class S and are designed for panel installation with the standard cutout 96x96mm. They each have three measuring inputs for connecting harmonic current and voltage converters, an Ethernet interface (Modbus TCP, HTTPS, NTP), two digital outputs and an expansion option. The measurement accuracy for phase currents/voltages is 0.2%, for powers 0.5%, harmonics 0.5%, THD/THH 0.5% and for energy values 0.5% (kWh/kVarh) .

    Technical data
    Basic properties

     

    • For panel installation 96×96 mm
    • 3 current and 3 voltage measurement channels with 0.2% accuracy, direct measurement or via current and voltage converters
    • Measuring category 600V, CAT III (voltage), 300V, CAT III (current)
    • Standard I/Os: 1 digital output, 1 digital input/output
    • Data logger with 16 GB data storage
    • Sampling rate: 18kHz
    • Monitoring and alarming via limit values and monitoring functions
    Network status

     

    • Provision of all voltages, currents, powers, power factors every 10/12 periods
    • Advanced reactive power analysis
    • Variance of network sizes with time reference
    Energy flow analysis

     

    • Load profile storage with fluctuation range (min/max) per interval
    • Active/reactive energy class 0.5S (HT/NT, purchase/supply), programmable resolution
    • Further average values and counters with selectable base size
    Network quality

     

    • Evaluation according to EN 50160, IEC 61000-2-2/4/12, IEEE 519 or self-defined limits
    • Conformity reports can be created directly via the device website (PQEasy report).
    • Independent certification according to IEC 62586-2 by the Swiss Federal Institute of Metrology METAS
    • Support for the standardized, manufacturer-independent PQDIF format according to IEEE 1159.3
    • Adjustable event recording duration: Up to 6 seconds for waveform and 3 minutes for RMS values
    • Event display via website with time zoom and value reading
    • Evaluation of the asymmetry of voltages and currents
    • Vector and rotation indicator for connecting control
    • Curve shape representation
    Hardware option

     

    an expansion module can be selected:

    • Analogue outputs ±20mA (2/4),
    • relay outputs (2),
    • Digital inputs (4) active / passive,
    • GPS time synchronization,
    • Fault current detection (differential or earth conductor current),
    • Temperature monitoring (Pt100, PTC),
    • IEC61850
    • Profinet I/O
    Communication

     

    • Ethernet (Modbus/TCP, http/https, NTP, SFTP, SYSLOG), IEC61850, Profinet I/O, Modbus/RTU
    • Automated data export to SFTP server
    Security features
    • Flexible role-based access control
    • Encrypted communication via https
    • Audit log registers all security-relevant processes, support of SYSLOG for transfer to central monitoring server
    • Client whitelist: IP address list to restrict the computers authorized to access
    • Digital firmware signature: Manipulated firmware files cannot be imported into the device
    Interfaces and accessories
    UBN PQ_AM Auxiliary voltage 24V DC Item number: 004970
    UBN PQ_AM Auxiliary voltage 24V DCReplacement for the 230VAC standard supply of a power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000 with 24V DC
    Offerlist Tender Text

    UBN PQ_AM RS485 Item number: 004961
    RS485
    Interface card with Modbus RTU protocol integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM UPS battery Item number: 004952
    UPS battery uninterruptible power supply 1,150 mAh battery power reserve 5 x 3 min integrated in power quality analyzer PQ3000/PQ5000 or multifunctional device AM3000
    Offerlist Tender Text

    UBN PQ_AM Profinet Item number: 004959
    Profinet
    Interface card (TCP/IP)Industrial Ethernet PNO compliant automationintegrated in power quality analyzer PQ1000/3000/5000or multifunction device AM1000/AM2000/AM3000a
    Offerlist Tender Text

    UBN PQ_AM IEC61850 Item number: 004958
    IEC 61850
    Interface card (TCP/IP) transmission protocol for substation automation integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM residual current detection Item number: 004956
    Residual current detection two-channel module integrated into power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card passive Item number: 004955
    Digital input card passive quadruple, passive for signal acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM analog output card Item number: 004954
    Analog output card dual, bipolar +-20 mA for signal output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM switching output card Item number: 004953
    Switch output cardRelay dual for alarm output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card active Item number: 004960
    Digital input card active four-fold, active for signal/pulse acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    Variants and tender texts
    UBN PQ1000 Netzqualitätsanalysator Item number:
    Offerlist Tender Text

UBN PQ3000

UBN PQ3000 power quality analyzers enable a permanent assessment of the power quality according to IEC 61000-4-30 Ed.3 in Class A and are developed for panel installation with the standard cutout 144x144mm. They each have four measuring inputs for connecting current and voltage transformers, an Ethernet interface (Modbus TCP, HTTPS, NTP), two digital outputs and three expansion options. The measurement accuracy for phase currents/voltages is 0.1%, for powers 0.2%, harmonics 0.5%, THD/THH 0.5% and for energy values 0.2% (kWh) or 0.5% ( kVarh).

    Technical data
    Basic properties

     

    • For panel installation 144×144 mm
    • 4 current and voltage measurement channels with 0.1% accuracy, direct measurement or via current and voltage converters
    • Measuring category 600V, CAT III (voltage), 300V, CAT III (current)
    • Standard I/Os: 2 digital output, 1 digital input/output
    • Data logger with 16 GB data storage
    • Sampling rate: 18kHz
    • Monitoring and alarming via limit values and monitoring functions
    Network status

     

    • Provision of all voltages, currents, powers, power factors every 10/12 periods
    • Advanced reactive power analysis
    • Variance of network sizes with time reference
    Energy flow analysis

     

    • Load profile storage with fluctuation range (min/max) per interval
    • Active/reactive energy class 0.2S/0.5S (HT/NT, purchase/supply), programmable resolution
    • Further average values and counters with selectable base size
    Network quality

     

    • Evaluation according to EN 50160, IEC 61000-2-2/4/12, IEEE 519 or self-defined limits
    • Conformity reports can be created directly via the device website (PQEasy report)
    • Independent certification according to IEC 62586-2 by the Swiss Federal Institute of Metrology METAS
    • Support for the standardized, manufacturer-independent PQDIF format according to IEEE 1159.3
    • Adjustable event recording duration: Up to 6 seconds for waveform and 3 minutes for RMS values
    • Event display via website with time zoom and value reading
    • Evaluation of the asymmetry of voltages and currents
    • Vector and rotation indicator for connecting control
    • Curve shape representation
    Hardware option

     

    Up to three expansion modules can be selected:

    • Analogue outputs ±20mA (2/4),
    • relay outputs (2),
    • Digital inputs (4) active / passive,
    • GPS time synchronization,
    • Fault current detection (differential or earth conductor current),
    • Temperature monitoring (Pt100, PTC),
    • IEC61850
    • Profinet I/O
    Communication

     

    • Ethernet (Modbus/TCP, http/https, NTP, SFTP, SYSLOG), IEC61850, Profinet I/O, Modbus/RTU
    • Automated data export (CSV and PQDIF format) to SFTP server
    Security features
    • Flexible role-based access control
    • Encrypted communication via https
    • Audit log registers all security-relevant processes, support of SYSLOG for transfer to central monitoring server
    • Client whitelist: IP address list to restrict the computers authorized to access
    • Digital firmware signature: Manipulated firmware files cannot be imported into the device
    Variants and tender texts
    UBN PQ3000 power quality analyzer Item number: 004962
    Transparent monitoring of power quality and energy consumption

    The UBN PQ3000 combines the features of a normative PQ measuring device with functions for energy consumption and network status analysis. The modern, multilingual design allows the device to be operated or parameterized intuitively via the device website or the high-resolution color TFT display (800x480px). The integrated web server enables remote query, display and analysis of the measurement data. No additional software is required.

    Basic version

    144 x 144 mm Panel mounting devicePower quality analysis Class A IEC 61000-4-30 Ed. 3
    Energy accuracy class: 0.2S
    Voltage measurement: 4 channels, 480V/ 832VCurrent measurement: 4 current transformers, 1 … 5A / 7.5ARTC,
    Data storage: 16GB
    Offerlist Tender Text

    Interfaces and accessories
    UBN PQ_AM Auxiliary voltage 24V DC Item number: 004970
    UBN PQ_AM Auxiliary voltage 24V DCReplacement for the 230VAC standard supply of a power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000 with 24V DC
    Offerlist Tender Text

    UBN PQ_AM RS485 Item number: 004961
    RS485
    Interface card with Modbus RTU protocol integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM UPS battery Item number: 004952
    UPS battery uninterruptible power supply 1,150 mAh battery power reserve 5 x 3 min integrated in power quality analyzer PQ3000/PQ5000 or multifunctional device AM3000
    Offerlist Tender Text

    UBN PQ_AM Profinet Item number: 004959
    Profinet
    Interface card (TCP/IP)Industrial Ethernet PNO compliant automationintegrated in power quality analyzer PQ1000/3000/5000or multifunction device AM1000/AM2000/AM3000a
    Offerlist Tender Text

    UBN PQ_AM IEC61850 Item number: 004958
    IEC 61850
    Interface card (TCP/IP) transmission protocol for substation automation integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM residual current detection Item number: 004956
    Residual current detection two-channel module integrated into power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card passive Item number: 004955
    Digital input card passive quadruple, passive for signal acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM analog output card Item number: 004954
    Analog output card dual, bipolar +-20 mA for signal output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM switching output card Item number: 004953
    Switch output cardRelay dual for alarm output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card active Item number: 004960
    Digital input card active four-fold, active for signal/pulse acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

UBN PQ5000

UBN PQ5000 power quality analyzers enable a permanent assessment of power quality according to IEC 61000-4-30 Ed.3 in class A and are developed for mounting on DIN rails. They each have four measuring inputs for connecting current and voltage transformers, an Ethernet interface (Modbus TCP, HTTPS, NTP), two digital outputs and two expansion options. The measurement accuracy for phase currents/voltages is 0.1%, for powers 0.2%, harmonics 0.5%, THD/THH 0.5% and for energy values 0.2% (kWh) or 0.5% (kVarh).

    Technical data
    Basic properties

     

    • For DIN rail mounting (WxHxD 160x110x70 mm)
    • 4 current and voltage measurement channels with 0.1% accuracy, direct measurement or via current and voltage converters
    • Measuring category 600V, CAT III (voltage), 300V, CAT III (current)
    • Standard I/Os: 2 digital output, 1 digital input/output
    • Data logger with 16 GB data storage
    • Sampling rate: 18kHz
    • Monitoring and alarming via limit values and monitoring functions
    Network status

     

    • Provision of all voltages, currents, powers, power factors every 10/12 periods
    • Advanced reactive power analysis
    • Variance of network sizes with time reference
    Energy flow analysis

     

    • Load profile storage with fluctuation range (min/max) per interval
    • Active/reactive energy class 0.2S/0.5S (HT/NT, purchase/supply), programmable resolution
    • Further average values and counters with selectable base size
    Network quality

     

    • Assessment according to EN 50160, IEC 61000-2-2/4/12, IEEE 519 or self-defined limits. Compliance reports can be created directly via the device website (PQEasy report).
    • Independent certification according to IEC 62586-2 by the Swiss Federal Institute of Metrology METAS
    • Support for the standardized, manufacturer-independent PQDIF format according to IEEE 1159.3
    • Adjustable event recording duration: Up to 6 seconds for waveform and 3 minutes for RMS values
    • Event display via website with time zoom and value reading
    • Evaluation of the asymmetry of voltages and currents
    • Vector and rotation indicator for connecting control
    • Curve shape representation
    Hardware option

     

    Up to two expansion modules can be selected:

    • Analogue outputs ±20mA (2/4),
    • relay outputs (2),
    • Digital inputs (4) active / passive,
    • GPS time synchronization,
    • Fault current detection (differential or earth conductor current),
    • Temperature monitoring (Pt100, PTC),
    • IEC61850
    • Profinet I/O
    Communication

     

    • Ethernet (Modbus/TCP, http/https, NTP, SFTP, SYSLOG), IEC61850, Profinet I/O, Modbus/RTU
    • Automated data export (CSV and PQDIF format) to SFTP server
    Security features
    • Flexible role-based access control
    • Encrypted communication via https
    • Audit log registers all security-relevant processes, support of SYSLOG for transfer to central monitoring server
    • Client whitelist: IP address list to restrict the computers authorized to access
    • Digital firmware signature: Manipulated firmware files cannot be imported into the device
    Variants and tender texts
    UBN PQ5000 power quality analyzer Item number: 004951
    The UBN PQ5000 power quality analyzer combines the features of a normative PQ measuring device with functions for energy consumption and network health analysis. The modern, multilingual design allows the device to be operated or parameterized intuitively via the device website or the optional high-resolution color TFT display (320x240px). The integrated web server enables remote query, display and analysis of the measurement data. No additional software is required.

    Basic version

    160 x 110 mm DIN railNetwork quality analysis Class A IEC 61000-4-30 Ed. 3
    Energy accuracy class: 0.2S
    Voltage measurement: 4 channels, LN/LL 520V / 900VCurrent measurement: 4 current transformers 1/5A
    Data storage: 16GB
    Offerlist Tender Text

    Interfaces and accessories
    UBN PQ_AM Auxiliary voltage 24V DC Item number: 004970
    UBN PQ_AM Auxiliary voltage 24V DCReplacement for the 230VAC standard supply of a power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000 with 24V DC
    Offerlist Tender Text

    UBN PQ_AM RS485 Item number: 004961
    RS485
    Interface card with Modbus RTU protocol integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM UPS battery Item number: 004952
    UPS battery uninterruptible power supply 1,150 mAh battery power reserve 5 x 3 min integrated in power quality analyzer PQ3000/PQ5000 or multifunctional device AM3000
    Offerlist Tender Text

    UBN PQ_AM Profinet Item number: 004959
    Profinet
    Interface card (TCP/IP)Industrial Ethernet PNO compliant automationintegrated in power quality analyzer PQ1000/3000/5000or multifunction device AM1000/AM2000/AM3000a
    Offerlist Tender Text

    UBN PQ_AM IEC61850 Item number: 004958
    IEC 61850
    Interface card (TCP/IP) transmission protocol for substation automation integrated into power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM residual current detection Item number: 004956
    Residual current detection two-channel module integrated into power quality analyzer PQ1000/3000/5000 or multifunctional device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card passive Item number: 004955
    Digital input card passive quadruple, passive for signal acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM analog output card Item number: 004954
    Analog output card dual, bipolar +-20 mA for signal output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM switching output card Item number: 004953
    Switch output cardRelay dual for alarm output integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

    UBN PQ_AM digital input card active Item number: 004960
    Digital input card active four-fold, active for signal/pulse acquisition integrated in power quality analyzer PQ1000/3000/5000 or multifunction device AM1000/AM2000/AM3000
    Offerlist Tender Text

Contact our energy optimisers now
 
Send Mail
Send Mail info@berg-energie.de
Contact now
Contact now