Sensors record measured values and prepare them for downstream systems for further data processing. Energy management systems like Efficio can access the collected data for various analysis purposes. Optimization measures can be initiated based on the sensor data.
Example applications for sensors:
- Electrical signals for automation technology (S0 pulses, analog signals 0 – 10 V DC, 0 – 20 mA)
- Room climate (temperature, humidity, CO² content, brightness)
- Presence detection (how much movement is taking place in the room)
- Access control (door closing contact)
Indoor temperature moisture sensor M-Bus
Measuring temperature and humidity is the basis for improving energy efficiency and indoor climate. The temperature and humidity sensor enables the indoor temperature and humidity to be recorded directly via the M-Bus. For example, the sensor can be connected directly to the Berg data logger BDL or LTE M-BUS Master via two wire. The voltage supply takes place via the M bus.
- High communication range
- One-touch commissioning for safe and flexible configuration
- User-friendly interface
- High measurement accuracy
- Guaranteed battery life of at least 12 years
Characteristics
Technical data
| Dimensions (L x W x H) | 85mm x 86mm x 31mm |
| Protection class | IP 20 |
| Input voltage | 21-42VDC |
| Power consumption | 1,5mA (1 Standardlast) |
| M-Bus Baudrate | 300 und 2400 Bit/s |
| Operating temperatur | 0 … 70°C |
| Measuring range | 0 … 70°C |
| Measurement accuracy | 0 … 60°C +/- 0.7°C |
| Measurement accuracy | 10 … 30°C +/- 0.1°C |
| Operational in air humidity from | 0 … 100% (non-condensing) |
| Humidity measurement accuracy | 10 … 90% rF +/- 2% |
| 0 … 100% rF +/- 4% |
Variant and tender text
MBL SENS TI D (CMA10) Item number: 004053
Protection class IP20
Dimensions: 80x80x28 mm
Measuring range: 0 to +50 °C +/- 0.4 °C
Humidity: 0 to 100% +/- 4% RH
Outdoor temperature-humidity sensor M-Bus
Measuring temperature and humidity is the basis for improving energy efficiency and indoor climate. The temperature and moisture sensor enables the direct recording of outside temperature and humidity via the M bus. For example, the sensor can be connected directly to the Berg data logger BDL or LTE M-BUS Master via two wire. The voltage supply takes place via the M bus.
- High communication range
- One-touch commissioning for safe and flexible configuration
- User-friendly interface
- High measurement accuracy
- Guaranteed battery life of at least 12 years
Characteristics
Technical data
| Dimensions (L x W x H) | 80mm x 80mm x 52mm |
| Protection class | IP 54 |
| Input voltage | 21-48VDC |
| Power consumption | 1,5mA (1 Standardlast) |
| M-Bus Baudrate | 300 und 2400 Bit/s |
| Operating temperatur | -40 … 55°C |
| Measuring range | -40 … 85°C |
| Measurement accuracy | -40 … 55°C +/- 1.5°C |
| Measurement accuracy | 10 … 30°C +/- 0.2°C |
| Measurement accuracy | -10 … 10°C +/- 0.5°C |
| Operational in air humidity from | 0 … 95% (nicht kondensierend) |
| Humidity measurement accuracy | 10 … 90% rF +/- 2% |
| 0 … 100% rF +/- 4% |
Variant and tender text
MBL SENS TI D (CMA10) Item number: 004053
Protection class IP20
Dimensions: 80x80x28 mm
Measuring range: 0 to +50 °C +/- 0.4 °C
Humidity: 0 to 100% +/- 4% RH
RS485 to LoRaWAN converter
The RS485 to LoRaWAN converter converts the RS485 signal into a LoRaWAN radio signal. The converter can e.g. B. can be used to connect energy meters with Modbus RTU output in order to realize remote reading in remote locations.
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | externally included in delivery |
| Power supply: | 24 VDC |
| Fieldbus: | RS485 Modbus RTU |
Variant and tender text
RS485 to LoRaWAN converter Item number: 004896
Radio frequency: 868 MHz
Antenna: incl. Screw-on antenna
Power supply: 24 VDC incl. LoRaWAN basic configuration
Indoor air quality sensors LoRaWAN
The sensors are used to measure the room climate; they measure temperature and humidity.
Depending on the sensor variant, the CO2 content, brightness, movements and room occupancy can also be recorded. The visual visualization takes place using the traffic light colors green, yellow and red.
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | integrated |
| Battery type (item no. 004897): | 3.6V AA, not included |
| Battery life: | up to 5-10 years |
| Dimensions in mm (L x W x H): | 86,0 x 86,0 x 27,6 |
Variants and tender texts
LoRaWAN room sensor for room occupancy Item number: 004895
LoRaWAN room sensor for CO2 measurement Item number: 004905
LoRaWAN room sensor door/window Item number: 004899
Radio frequency: 868 MHz
Antenna: integrated
Dimensions (L x W x H): 74.9mm x 20.8mm x 21.2mm
Magnet: included in delivery incl. Basic configuration of the sensor
Accesories
LoRaWAN BATTERY 3.6V Item number: 004897
Battery type: lithium
Voltage: 3.6 volts
Capacity: 2200mAh
Lifespan: up to 10 years
Cell size: AA (Mignon)
Technology: LiSOCl2
Zellentyp: Industrie
LoRaWAN outdoor temperature sensor
The waterproof LoRaWAN outdoor temperature sensor is used to measure the ambient temperature. It measures temperatures from -55°C to 125°C with an accuracy of ±0.5°C. The moisture-proof and rust-proof sensor is suitable for continuous use.
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | externally included in delivery |
| Battery type (item no. 004897): | 3.6V Lithium ER26500 C is not included |
| Battery life: | up to 10 years |
| Operating temperature: | -55 °C – 125 °C |
| Dimensions in mm (L x W x H): | 65 x 47 x 97 |
| Protection class: | IP68 |
Variant and tender text
LoRaWAN outdoor temperature sensor Item number: 004907
Radio frequency: 868 MHz
Antenna: included
Cable length: 2m
Protection class: IP68
Accesories
LoRaWAN BATTERY 3.6V Item number: 004897
Battery type: lithium
Voltage: 3.6 volts
Capacity: 2200mAh
Lifespan: up to 10 years
Cell size: AA (Mignon)
Technology: LiSOCl2
Zellentyp: Industrie
Pulse counter LoRaWAN
The LoRaWAN pulse counter is used to measure analog or digital signals. It is used, for example, to record pulses from electricity meters or to record analog sensors.
Thanks to its waterproof and dustproof housing, it is ideal for outdoor use.
- Pulse counter
- Digital Input
- 0…20mA Analog Input
- 0…10V Analog Input
- external 1-wire temperature sensor DS18B20 (not included)
- leakage water
Technical data
| Radio frequency: | 868 MHz |
| Antenna (item no. 004919): | Externally not included in delivery |
| Battery (ArtNr. 004897): | 3.6V AA lithium battery is not included |
| Battery life: | up to 2 years |
| Operating temperature: | -40°C bis 60°C |
| Dimensions in mm (L x W x H): | 94 x 59 x 35 |
| Protection class: | IP 67 |
| – | |
| Interface configurable to one of the following functions: |
|
Variant and tender text
LoRaWAN pulse counter outdoor sensor IP67 Item number: 004917
Radio frequency: 868 MHz
Operating temperature: -40 to 60 °C
Dimensions in mm (L x W x H): 94 x 59 x 35
Accesories
LoRaWAN BATTERY 3.6V Item number: 004897
Battery type: lithium
Voltage: 3.6 volts
Capacity: 2200mAh
Lifespan: up to 10 years
Cell size: AA (Mignon)
Technology: LiSOCl2
Zellentyp: Industrie
I/O Controller LoRaWAN
The LoRaWAN I/O controller is a long-range module. It can be parameterized for various I/O interfaces such as digital inputs and outputs, analog current and voltage inputs and relay outputs.
- 2x Digital Input
- 2x Digital Output
- 2x Relay Output (5A@250VAC / 30VDC)
- 2x 0…20mA Analog Input (res: 0.01mA)
- oder 2x 0…30V Analog Input (res: 0.01v)
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | externally included in delivery |
| Power supply: | 24 VDC |
| – | |
| Interfaces configurable to one of the following functions: |
|
Variant and tender text
LoRaWAN I/O Controller Item number: 004898
Radio frequency: 868 MHz
Antenna: incl. Screw-on antenna
Power supply: 24 VDC
Interfaces: configurable
Door Window Contact LoRaWAN
The LoRaWAN sensor for indoor use measures the number of times doors or windows are opened.
It continues to show the status (open or closed).
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | integrated |
| Battery type (item no. 004897): | 3.6V AA is not included |
| Battery life: | up to 10 years |
| Dimensions in mm (L x W x H): | 74,9 x 20,8 x 21,2 |
| Magnet: | included |
Variant and tender text
LoRaWAN room sensor door/window Item number: 004899
Radio frequency: 868 MHz
Antenna: integrated
Dimensions (L x W x H): 74.9mm x 20.8mm x 21.2mm
Magnet: included in delivery incl. Basic configuration of the sensor
Accesories
LoRaWAN BATTERY 3.6V Item number: 004897
Battery type: lithium
Voltage: 3.6 volts
Capacity: 2200mAh
Lifespan: up to 10 years
Cell size: AA (Mignon)
Technology: LiSOCl2
Zellentyp: Industrie
BMH3603 LoRaWAN meter module
The plug-in card is used to transmit meter data via LoRaWAN. It can be operated with heat or cooling meters BMH 3603 or BMC 3603. The simple installation of the meter module makes it possible to quickly convert to LoRaWAN technology.
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | integrated |
| Battery: | integrated |
| Battery life: | up to 10 years |
Variant and tender text
LoRaWAN PLUG CARD BMH3603 Item number: 004947
Optokopf KLAX LoRaWAN
The KLAX optical head is used to read electricity meters via LoRaWAN. To do this, the KLAX is attached to the integrated, optical interface of modern measuring devices using a magnet.
The optical head records the signals via an infrared interface and transmits them via LoRaWAN.
The determined counter values are available in the LoRaWAN backend shortly after the measurement and can be used, for example. B. can be further processed with the Efficio energy management software.
Technical data
| Radio frequency: | 868 MHz |
| Antenna: | integrated |
| Battery (item no. 004938): | 3V AA lithium battery is not included |
| Interface: | Infrarot SML |
| Operating temperatur: | 0°C bis 60°C |
| Mechanics: | magnetic attachment (ABS housing) |
| Protection class: | IP20 |
| Dimensions in mm (L x W x H): | 96 x 35 x 40 |
Variant and tender text
LoRaWAN optical head KLAX Item number: 004939
Radio frequency: 868 MHzType: LoRaWAN Class A
Interface: infrared
Protection class: IP20
Operating temperature: 0°C to 60°C
Dimensions in mm (L x W x H): 96 x 35 x 40
